The FM outlines our core skills, policies and guides to ensure every member stands ready for the mission ahead.
FM/BG-565 · v2.00
Kestrel 4500: Environmental Conditions
- Code
- FM/BG-565
- Kind
- Guide
- Version
- v2.00 2yrs ago
- Views
- 377
- Platforms
- As its document
- Published by
- MSG mbaker5114 17 Jun 2024
- Last material change
- v2.00
2 words added, 94 words removed.
v1.02
Use your Kestrel to find the current atmospheric temperature, pressure and humidity at your firing position.
For this you have to open your Kestrel 4500 and go to Screen 2.
Input the values shown in the AtragMX. (Figure 1)
If you did everything correctly at the start of the game, you should now have the correct muzzle velocity.
Use your Range Finder to measure the current distance and inclination angle to your target and input the values shown into the AtragMX. (Figure 2)
If equipped with a Vector range finder, you can connect the AtragMX to the Vector and have the distance and inclination values automatically inserted into the AtragMX. You can do this by:
Opening ACE self-interact: select Configure DAGR > Connect > Vector.
From then on, by holding Tab + R for one second centered on the target the values will be automatically sent ot the AtragMX.
v2.00
Use your Kestrel to find the current atmospheric temperature, pressure and humidity at your firing position.
For this you have to open your Kestrel 4500 and go to Screen 2.
Input the values shown in the AtragMX below.
If you did everything correctly at the start of the game, you should now have the correct muzzle velocity.
Use your Kestrel to find the current atmospheric temperature, pressure and humidity at your firing position.
For this you have to open your Kestrel 4500 and go to Screen 2.
Input the values shown in the AtragMX. (Figure 1) AtragMX below.
If you did everything correctly at the start of the game, you should now have the correct muzzle velocity.
Use your Range Finder to measure the current distance and inclination angle to your target and input the values shown into the AtragMX. (Figure 2)
If equipped with a Vector range finder, you can connect the AtragMX to the Vector and have the distance and inclination values automatically inserted into the AtragMX. You can do this by:
Opening ACE self-interact: select Configure DAGR > Connect > Vector.
From then on, by holding Tab + R for one second centered on the target the values will be automatically sent ot the AtragMX.
Where it appears
Lives in
FM/G84 Assisted ballisticsOn role cards
On 2 role cards in 1 combat area.
By combat area
-
Marksmanship
2 of 7